TITANIUM Front caliper pistons for the NSR250 are now on sale and look amazing in the caliper.
They have 2mm castellations to allow air to flow inside the piston and help cooling but they also reduce the contact patch with the brake pad and thereby reduce the heat transferred to the caliper piston, which in turn reduces the heat transferred to the brake fluid.
Titanium if you don't know is a poor conductor of heat so will reduce further still heat transference to the brake fluid.
Also on sale are NSR250 (MC28) Titanium front wheel spindles which save 100gm of weight.
They come with a hard Titanium Nitride coating and are the same dimensions as the original part.
They come with a hard Titanium Nitride coating and are the same dimensions as the original part.
RGV250K (1989) rear caliper piston
Coming at some point in the near future is a Titanium rear caliper piston for the RGV250 but also caliper pistons for the later RGV250T (VJ23) model
Coming at some point in the near future is a Titanium rear caliper piston for the RGV250 but also caliper pistons for the later RGV250T (VJ23) model
The belief is that the TiN hardened surface coating will allow the caliper to move more freely.
These are new in. If you have a YZF-R1 or R6 you'll recognise this banjo type.
THey're M10 x 1.25mm thread type
As people put their bikes away for the winter there are a couple of months where I can get new products made without the craziness at the start of the year where everyone is preparing their bikes for riding.
So, if you have ideas for new Titanium products to be made now is a good time to get in touch.
The head studs for the Pre 1988 KX500 is the perfect example of this. The OEM head studs aren't being produced any more and a customer sent me one of his. I got a small run of the made and they're selling well. He was very happy with his studs! :)
That's it for now. Hope you've enjoyed the blog post and have a look at the titanclassics.com website to see if there's anything you fancy
Cheers
Rich
https://titanclassics.com/
No comments:
Post a Comment